====== Android Phone Notes ======
===== Reset a Locked Phone =====

These instructions apply to the situation in which someone has set the lock code and can't remember it.  The result is a "wipe data/factory reset".
  - Power off phone (hold red button, select power off).
  - Turn on phone (red button) while holding the Home button.  Should see an exclamation point in a triangle and a phone icon.
  - Open keyboard.
  - Select ALT+W to wipe the phone.  

All user data and installed programs are lost.

See http://phandroid.com/2008/10/25/how-to-reset-your-g1-and-start-from-scratch/ for more information.

===== Update Android G1 (HTC) Firmware =====

See http://www.htc.com/www/support/android/adp.html.

  * Update "Device Radio Firmware" first,
  * Then update using "Recovery Image" approach second.

===== Allow Use without a SIM Card =====

See http://android-tricks.blogspot.com/2009/01/using-adp1-without-sim-card.html.

This trick is no longer necessary (if it ever was).  Instead, just work through the Android menus--there's an option to bypass the telephone configuration.

===== Configuring the Android Dev Phone to Work with AT&T =====

Set the [[http://en.wikipedia.org/wiki/Access_Point_Name | APN]] (Access Point Name) to point to the Cingular service provider.  From the Home screen on the Android...

  - Press the MENU button
  - Select Settings
  - Select Wireless Controls
  - Select Mobile Networks
  - Select Access Point Names
  - Press the MENU button
  - Select New APN
  - Add this information:
    * Name:  AT&T
    * APN:  wap.cingular
    * Proxy: <Not Set>
    * Port:  <Not Set>
    * Username:  wap@cingulargprs.com
    * Password:  CINGULAR1
    * Server: <Not Set>
    * MMSC: http://mmsc.cingular.com
    * MMS Proxy: wireless.cingular.com 
    * MMS Port: 80
    * MCC: 310
    * MNC: 410
    * APN type: <Not Set>
  - Press the MENU button
  - Select Save
  - Turn off phone and install SIM card
  - Turn on phone and enjoy

Thanks, Kip.
===== Configuring Android Phones to Work with PAL2.0 =====

To configure Android-based phones to work with PAL2.0...

1. Settings (from home screen, press option hard key).

2. Wireless & Networks.

3. Wi-Fi settings.

4. Add Wi-Fi network (at bottom of screen).
  * Network SSID: PAL2.0
  * Security: 802.1x EAP
  * EAP method: PEAP
  * Phase 2 authentication: MSCHAPV2
  * CA certificate: (unspecified)
  * User certificate: (unspecified)
  * Identity: <ITaP career account>
  * Anonymous identity: (unspecified)
  * Password: <ITaP password>

That should do it and PAL2.0 should connect.