Differences

This shows you the differences between two versions of the page.

--- android_phone_notes [2009/09/17 14:48] – jtkorb
+++ android_phone_notes [2011/02/26 05:30] (current) – removed setting for anonymous identity; not needed jtkorb
@@ Line 1: / Line 1: @@
 ====== Android Phone Notes ======
+===== Reset a Locked Phone =====
+These instructions apply to the situation in which someone has set the lock code and can't remember it.  The result is a "wipe data/factory reset".
+  - Power off phone (hold red button, select power off).
+  - Turn on phone (red button) while holding the Home button.  Should see an exclamation point in a triangle and a phone icon.
+  - Open keyboard.
+  - Select ALT+W to wipe the phone.
+All user data and installed programs are lost.
+See http://phandroid.com/2008/10/25/how-to-reset-your-g1-and-start-from-scratch/ for more information.
 ===== Update Android G1 (HTC) Firmware =====
@@ Line 14: / Line 22: @@
 See http://android-tricks.blogspot.com/2009/01/using-adp1-without-sim-card.html.
+This trick is no longer necessary (if it ever was).  Instead, just work through the Android menus--there's an option to bypass the telephone configuration.
 ===== Configuring the Android Dev Phone to Work with AT&T =====
@@ Line 46: / Line 56: @@
 Thanks, Kip.
+===== Configuring Android Phones to Work with PAL2.0 =====
+To configure Android-based phones to work with PAL2.0...
+. Settings (from home screen, press option hard key).
-===== Configuring the Android Dev Phone to Work with PAL2.0 =====
+. Wireless & Networks.
-  - Install the Android SDK.  Open a local shell window.  Plug in the Android via USB.
+. Wi-Fi settings.
-  - Start the adb daemon as root...
-<code>
-% adb root
-</code>
-  - Get a copy of the ''Thawte_Premium_Server_CA.pem'' file from, say, http://www.cs.purdue.edu/homes/fultz/Thawte_Premium_Server_CA.pem.
-  - Save the certificate to a local file, say ''cert.pem''.
-  - Copy the certificate to the phone.
-<copy>
-% adb push cert.pem /sdcard/certs/Thawte_Premium_Server_CA.pem''
-  - Get the current ''wpa_supplicant.conf'' file in ''/data/misc/wifi'' (if it exists)...
-<code>
-  % adb pull /data/misc/wifi/wpa_supplicant.conf x.txt
-</code>
-  - Copy the text below into your (scratch) ''x.txt'' file.  Be sure to edit in your login id and password (sigh).
-<code>
-ctrl_interface=tiwlan0
-update_config=1
-network={
+. Add Wi-Fi network (at bottom of screen).
-	ssid="PAL2.0"
+  * Network SSID: PAL2.0
-	id_str="pal20"
+  * Security: 802.1x EAP
-	scan_ssid=1
+  * EAP method: PEAP
-	proto=WPA RSN
+  * Phase 2 authentication: MSCHAPV2
-	key_mgmt=WPA-EAP
+  * CA certificate: (unspecified)
-	pairwise=TKIP
+  * User certificate: (unspecified)
-	group=TKIP
+  * Identity: <ITaP career account>
-	eap=PEAP
+  * Anonymous identity: (unspecified)
-	ca_cert="/sdcard/certs/Thawte_Premium_Server_CA.pem"
+  * Password: <ITaP password>
-	identity="***LOGIN***"
-	password="***PASSWORD***"
-	phase2="auth=MSCHAPV2"
-}
-</code>
-  - Copy your modified ''x.txt'' file back out to the ''wpa_supplicant.conf'' file.
-<code>
-% adb push x.txt /data/misc/wifi/wpa_supplicant.conf
-</code>
-  - Turn off WiFi, and then turn it back on.  If that doesn't do it, then reboot the phone...
-<code>
-% adb shell
-# reboot
-</code>
-Thanks, Charlie.
+That should do it and PAL2.0 should connect.