Differences

This shows you the differences between two versions of the page.

--- android_phone_notes [2010/05/08 13:09] – jtkorb
+++ android_phone_notes [2011/02/26 05:30] (current) – removed setting for anonymous identity; not needed jtkorb
@@ Line 10: / Line 10: @@
 All user data and installed programs are lost.
+See http://phandroid.com/2008/10/25/how-to-reset-your-g1-and-start-from-scratch/ for more information.
 ===== Update Android G1 (HTC) Firmware =====
@@ Line 55: / Line 56: @@
 Thanks, Kip.
-===== Configuring the Android Dev Phone to Work with PAL2.0 =====
+===== Configuring Android Phones to Work with PAL2.0 =====
-**NOTE: These instructions are somewhat dated due to upgrades to the Android OS in fall 2009.  Specifically, PAL2.0 can now be configured from within the phone UI, obviating the need to copy and paste the wpa_supplicant.conf configuration file.**
+To configure Android-based phones to work with PAL2.0...
-. Install the Android SDK.  Open a local shell window.  Plug in the Android via USB.
+. Settings (from home screen, press option hard key).
-. Start the adb daemon as root...
+. Wireless & Networks.
-<code>
+. Wi-Fi settings.
-% adb root
-</code>
-. Get a copy of the ''Thawte_Premium_Server_CA.pem'' file from [[http://www.cs.purdue.edu/homes/fultz/Thawte_Premium_Server_CA.pem|here]] (or elsewhere).
+. Add Wi-Fi network (at bottom of screen).
+  * Network SSID: PAL2.0
+  * Security: 802.1x EAP
+  * EAP method: PEAP
+  * Phase 2 authentication: MSCHAPV2
+  * CA certificate: (unspecified)
+  * User certificate: (unspecified)
+  * Identity: <ITaP career account>
+  * Anonymous identity: (unspecified)
+  * Password: <ITaP password>
-. Save the certificate to a local file, say ''cert.pem''.
+That should do it and PAL2.0 should connect.
-. Copy the certificate to the phone...
-<code>
-% adb push cert.pem /sdcard/certs/Thawte_Premium_Server_CA.pem
-</code>
-. Get the current ''wpa_supplicant.conf'' file from ''/data/misc/wifi'' (if it exists)...
-<code>
-% adb pull /data/misc/wifi/wpa_supplicant.conf x.txt
-</code>
-. Copy the text below into your (scratch) ''x.txt'' file.  Be sure to edit in your login id and password (sigh).
-<code>
-ctrl_interface=tiwlan0
-update_config=1
-network={
-	ssid="PAL2.0"
-	id_str="pal20"
-	scan_ssid=1
-	proto=WPA RSN
-	key_mgmt=WPA-EAP
-	pairwise=TKIP
-	group=TKIP
-	eap=PEAP
-	ca_cert="/sdcard/certs/Thawte_Premium_Server_CA.pem"
-	identity="***LOGIN***"
-	password="***PASSWORD***"
-	phase2="auth=MSCHAPV2"
-}
-</code>
-. Copy your modified ''x.txt'' file back out to the ''wpa_supplicant.conf'' file.  (Delete ''x.txt'' when you're done, since it contains your password!)
-<code>
-% adb push x.txt /data/misc/wifi/wpa_supplicant.conf
-</code>
-. Turn off WiFi, and then turn it back on.  If that doesn't do it, then reboot the phone...
-<code>
-% adb shell
-# reboot
-</code>
-Thanks, Charlie.