User Tools

Site Tools


android_phone_notes

This is an old revision of the document!


Android Phone Notes

Update Android G1 (HTC) Firmware

See http://www.htc.com/www/support/android/adp.html.

  • Update “Device Radio Firmware” first,
  • Then update using “Recovery Image” approach second.

Allow Use without a SIM Card

Configuring the Android Dev Phone to Work with AT&T

Set the APN (Access Point Name) to point to the Cingular service provider. From the Home screen on the Android…

  1. Press the MENU button
  2. Select Settings
  3. Select Wireless Controls
  4. Select Mobile Networks
  5. Select Access Point Names
  6. Press the MENU button
  7. Select New APN
  8. Add this information:
    • Name: AT&T
    • APN: wap.cingular
    • Proxy: <Not Set>
    • Port: <Not Set>
    • Username: wap@cingulargprs.com
    • Password: CINGULAR1
    • Server: <Not Set>
    • MMS Proxy: wireless.cingular.com
    • MMS Port: 80
    • MCC: 310
    • MNC: 410
    • APN type: <Not Set>
  9. Press the MENU button
  10. Select Save
  11. Turn off phone and install SIM card
  12. Turn on phone and enjoy

Thanks, Kip.

Configuring the Android Dev Phone to Work with PAL2.0

  1. Install the Android SDK. Open a local shell window. Plug in the Android via USB.
  2. Connect to the Android…
    1. % adb root [if necessary]
    2. % adb shell
  3. Copy Thawte_Premium_Server_CA.pem to /sdcard/certs
    1. % mkdir /sdcard/certs [if necessary]
    2. % cat > /sdcard/certs/Thawte_Premium_Server_CA.pem
    3. [Paste]
    4. ^D
  4. Update/create file wpa_supplicant.conf in /data/misc/wifi
    1. Get the current version (if it exists)…
  % adb pull /data/misc/wifi/wpa_supplicant.conf x.txt
  1. Copy the text below into your (scratch) x.txt file. Be sure to edit in your login id and password (sigh).
ctrl_interface=tiwlan0
update_config=1

network={
	ssid="PAL2.0"
	id_str="pal20"
	scan_ssid=1
	proto=WPA RSN
	key_mgmt=WPA-EAP
	pairwise=TKIP
	group=TKIP
	eap=PEAP
	ca_cert="/sdcard/certs/Thawte_Premium_Server_CA.pem"
	identity="***LOGIN***"
	password="***PASSWORD***"
	phase2="auth=MSCHAPV2"
}
  1. Copy your modified x.txt file back out to the wpa_supplicant.conf file.
% adb push x.txt /data/misc/wifi/wpa_supplicant.conf
  1. Turn off WiFi, and then turn it back on. If that doesn't do it, then reboot the phone…
    1. adb shell
    2. # reboot

Thanks, Charlie.

android_phone_notes.1253223726.txt.gz · Last modified: 2009/09/17 14:42 by jtkorb